Finding the Correct LED Light Line Power Supply

Anyone purchasing LED lighting strips must also check into getting a power source. A power supply unit that is peripheral is often relied upon by LED strips. This source is likewise widely known as a driver or a transformer. In most instances unless the fitting is electric battery operated a power source unit is necessary making the LED installing work.

Power Source Varieties

Power supplies exist in a selection of sizes and shapes. Some of the products would be the standard play and plug varieties while others are more of the commercial type transformers that are typically hard wired into the mains. It is also not uncommon to learn that these power supply unites are called transformers. ecopac led power supply ‘s essentially because of the fact that apart from giving power to LED strips these units can also be built to change the mains two hundred thirty volts AC to a lower voltage of about twelve votes DC thus making the ability more relevant to the lighting used.

Play and plug versus Hard-wiring

There are several points that need to be thought out concerning deciding on the style of power supply for your lighting.

To begin with, it need to be determined whether you’re aiming to plug right into a wall socket or do you want to have the strips of LED lights hard wired to the light switch?

Plug & Play

If the above mentioned question’s solution is “YES” then it is important to make use of a regular plug and play unit. This’s by far the most regular power supply in the industry which permits an easy and quick set up for many common uses within the household area via a plug origin. The whole device includes a kettle lead with the normal 3 prong UK mains plug, a black transformer, kettle lead with the usual three prong UK plug and a twelve volt male connector that fastens on the strip via its matching female connector. The full unit is much like a 2 meter length laptop charger.


For applications that are more difficult or perhaps in the affair that a wall plug is unavailable alternative power source mains can be found. In the place of any kettle lead, devices similar to these feature a long main cable which could then be connected straight to the mains.


Furthermore when selecting the kind of power source, one will also need to have learning the specific size. These devices are available in a range of various sizes. It is able to range from twenty watts to more often than not higher than this number. These digits entail the greatest capacity that a power supply is able to manage safely. The LED strip ton is calculated by multiplying the per metre wattage to the number of metres to be used. For instance if the per metre power level is seven point 2 watts as well as the metres being used is ten, then the product or even total load computation ought to be 70 two watts.

It’s important to know the capacity does not review the optimum requirement load otherwise performance issues will be perceived with the burning strips. Examples is lifespan reduction and voltage drops in the lights.

Leave a Reply

Your email address will not be published. Required fields are marked *